Hay Rake Tines

Flexible spring steel tine to fit Sitrex wheel rakes. There are 40 tines per rake wheel. Sitrex original equipment tines are gentle on the hay crop and provide excellent raking action.

 

Product Details:

 

Sitrex finger wheel rakes are renowned for their clean raking action, and gentle handling of the forage crop. Sitrex finger wheel rakes are built for performance, simplicity and value. Perhaps the most beneficial feature of the Sitrex finger wheel rake is the operating speed of the rake. The operating speed is a direct function of the wheel rake action, and the key to the raking action is built into the rake tine.

 

Sitrex rake tines are constructed of high quality spring steel to provide long life and improved performance. A stout 7mm diameter wire is used to construct the rake tine. Each tine is bent into a consistent shape, and heat treated to provide the correct flexing characteristics that improve raking speed and action.

 

Each finger wheel contains forty (40) rake tines. Replacement Sitrex rake tines are conveniently bundled in packs of 40 tines. Tines are easily replaced by unbolting and tine keeper and threading the new tine through the finger wheel flange.

 

Constructed of superior quality spring steel

Diameter of tine: 7mm

Bundled in packs of 40 tines, priced individually

 

Brand: Sitrex

 

Contact us to know more about our brand new products:

https://forddistributing.com/rake-tine-7mm-parts-and-accessories.html

Comments

Post a Comment

Popular posts from this blog

3 point lawn roller | Frontline 3 Point Hitch Roller | Ford Distributing

Image
Frontline heavy wall rollers are available in three point hitch, or drawbar pull. At the heart of this roller is a 20” diameter cylindrical steel pipe, with a wall thickness of ¼“. The roller axle is solid steel rod and is continuous through the length of the roller. Heavy duty pillow block bearings support the axle at each end.   All Frontline rollers can be filled with water to increase the rolling weight. The fill plug is 1” in diameter and located in the end wall of the roller for easy access. Additional weight may be added to the weight box that is sized to accept concrete blocks. The weight box is 16.5" front to back and 1" deep. A rugged 3-point hitch frame is perfectly sized for standard quick hitch mounting. The operator can back up to the roller and couple the 3-point hitch quickly and safely. Retractable parking stands insure that the roller is in the correct position for 3-point hitch mounting ease.   Frontline three point hitch rollers are manufactured by No...
Read more

Brush cutter Blade kit | Ground Shark GSS72 Blades | Ford Distributing

Image
Bradco Standard Duty Ground Shark blades are constructed of high quality steel; forged and heat tempered for maximum performance and long life. To keep the Bradco Ground Shark operating at peak performance, the blades should be checked regularly for excessive wear and damage. Ground Shark blades can be removed and sharpened easily. A blade access port on the cutter deck allows for easy access to the blade securing nut. When Ground Shark blades have worn to the point that they can’t be sharpened, they should be replaced immediately with a fresh set of balanced blades. Each replacement blade kit contains three (3) blades, special hardened blade bolts, castellated nuts, and cotter pins to secure the blade nuts. Ground Shark blades are designed exclusively to fit the Bradco Ground Shark brush cutter . Aftermarket blades from other manufacturers should not be used on the Bradco Ground Shark. Aftermarket blades will not have the same performance specifications of the OEM Bradco Ground Shar...
Read more