Hay Rake Tines

Bradco Standard Duty Ground Shark blades are constructed of high quality steel; forged and heat tempered for maximum performance and long life. To keep the Bradco Ground Shark operating at peak performance, the blades should be checked regularly for excessive wear and damage. Ground Shark blades can be removed and sharpened easily. A blade access port on the cutter deck allows for easy access to the blade securing nut. When Ground Shark blades have worn to the point that they can’t be sharpened, they should be replaced immediately with a fresh set of balanced blades. Each replacement blade kit contains three (3) blades, special hardened blade bolts, castellated nuts, and cotter pins to secure the blade nuts. Ground Shark blades are designed exclusively to fit the Bradco Ground Shark brush cutter . Aftermarket blades from other manufacturers should not be used on the Bradco Ground Shark. Aftermarket blades will not have the same performance specifications of the OEM Bradco Ground Shar...

Frontline heavy wall rollers are available in three point hitch, or drawbar pull. At the heart of this roller is a 20” diameter cylindrical steel pipe, with a wall thickness of ¼“. The roller axle is solid steel rod and is continuous through the length of the roller. Heavy duty pillow block bearings support the axle at each end.   All Frontline rollers can be filled with water to increase the rolling weight. The fill plug is 1” in diameter and located in the end wall of the roller for easy access. Additional weight may be added to the weight box that is sized to accept concrete blocks. The weight box is 16.5" front to back and 1" deep. A rugged 3-point hitch frame is perfectly sized for standard quick hitch mounting. The operator can back up to the roller and couple the 3-point hitch quickly and safely. Retractable parking stands insure that the roller is in the correct position for 3-point hitch mounting ease.   Frontline three point hitch rollers are manufactured by No...